Obd2 scanner

The best way to Check the Engine Code for an Auxiliary Emissions Dilemma Obd2 scanner

1Open the fuse panel cover beneath your vehicle's steering wheel. Some fuse panel covers have a knob that demands to become turned counterclockwise in an effort to take away the panel though other panels are held in spot with retaining clips and may be pulled off having a good tug.

2Locate the port in your fuse panel that may accept the OBD tool. There is going to be only one particular port open on the fuse panel that is certainly large adequate to accept the OBD scan tool.3Plug the connector from the OBD scan tool in to the fuse panel.4Turn the ignition important to the "II" or "run" position on your ignition.

5Check the display on the OBD scan tool. It is going to produce a numeric code that you could then reference within your vehicle's service manual. "Auxiliary emissions" refers to an oxygen sensor unit in the exhaust that is definitely either malfunctioning or has failed. Commonly, this signifies replacing the defective unit. Having said that Auto tools, the OBD scan tool and engine code will confirm this.

Related articles: