How to reset SRS indicator light for Honda and Acura cars 1Stop the car on a flat surface, apply the parking brake and turn the ignition crucial switch for the “OFF&rdquo Auto diagnostic tools; position. Wait a moment and turn the ignition key switch to the “ON” position. Leave the crucial in the ignition, with the power on and headlights off.2Exit the vehicle and turn on your flashlight. Shine the flashlight underneath the driver’s side dashboard area and locate the diagnostic data terminal.
This port could be in a slightly different location depending upon the exact make and model of your automobile, although it’s generally mounted underneath the dashboard on the driver’s side, just out of view. The terminal is shaped like a small rectangle with slanted edges and matches the profile of the plug on the end of the scan tool’s data cable.3Connect the scan tool’s communications cable to the data terminal port by pressing the cable’s connector down onto the port until it’s fully-seated. Sit in the vehicle and power on the scan tool.
4Use the buttons on the scan tool to navigate towards the SRS module menu. Navigate for the SRS codes screen and choose the option to clear all of the codes, both current and past, from the SRS modules memory. Wait for the scan tool to display a confirmation message that the codes have been cleared.5Exit the codes menu and return to the home screen Car Diagnostic Tools. Power down the scan tool and disconnect it from the diagnostic terminal. Start the vehicle and check to make sure that the SRS isn’t illuminated.
Related articles:
没有评论:
发表评论